LEGRAND PDU, Руководство пользователя

Страница: 168 / 505

Ju
ne
20
18
168 Legrand PDU User Guide
 Click to remove it.
 To resort its order, click or .
5. Click Save.
 IPv4 rules:
Make sure you click the Save button in the IPv4 section
, or the changes made to IPv4
rules are not saved.

IPv6 rules:
Make sure you click the Save button in the IPv6 section
, or the changes made to IPv6
rules are not saved.
Creating Role Based Access Control Rules
Role-based access control rules are similar to IP access control rules, except that they are applied to
members of a specific role. This enables you to grant system permissions to a specific role, based on their IP
addresses.
Same as IP access control rules, the order of role-based access control rules is important, since the rules
are executed in numerical order.

To create IPv4 role-based access control rules:
1. Choose Device Settings > Security > Role Based Access Control.
2. Select the "Enable Role Based Access Control for IPv4" checkbox to enable IPv4 access control rules.
3. Determine the IPv4 default policy.
 Accept: Accepts traffic when no matching rules are present.
 Deny: Rejects any user's login attempt when no matching rules are present.
4. Create rules. Refer to the tables below for different operations.
ADD a rule to the end of the list
 Click Append.
 Type a starting IP address in the Start IP field.
 Type an ending IP address in the End IP field.
 Select a role in the Role field. This rule applies to members of this role only.
 Select an option in the Policy field.
 Accept: Accepts traffic from the specified IP address range when the user is a
member of the specified role.
 Deny: Rejects the login attempt of a user from the specified IP address range
when that user is a member of the specified role.
INSERT a rule between two rules
 Select the rule above which you want to insert a new rule. For example, to insert a
rule between rules #3 and #4, select #4.
 Click Insert Above.
 Type a starting IP address in the Start IP field.
 Type an ending IP address in the End IP field.
 Select a role in the Role field. This rule applies to members of this role only.
 Select
Accept
or
Deny
in the Policy field. Refer to the above table for details.
The system automatically numbers the rule.
5. When finished, the rules are listed on this page.