301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
Page 1 of 2
©Copyright 2005 by On-Q/Legrand All Rights Reserved.
INSTRUCTION/INSTALLATION SHEET
3x4 Enhanced Bi-Directional Video
Amplifier
IS-0317 REV. O
1. Introduction
The On-Q 3x4 Enhanced Bi-directional Video Amplifier (P/N F7630 as shown below) is designed to distribute
external CATV/Antenna and multiple internal modulated RF signals around the home. Its four high gain
outputs are designed to be used to drive passive splitter modules to provide up to 32 amplified video outputs.
2. Description
The On-Q 3x4 Enhanced Bi-directional Video Amplifier, (see
Figure 1
) is designed to be mounted in a double
bay bracket with push-pins at each corner of the module.
NOTE: Due to the orientation of the RF connectors and bend radius limitations of coaxial cable, the
3x4 Enhanced Video Amplifier should only be installed in the deeper Titan enclosure, or
Premium/Custom enclosures with enclosure extenders added.
3. Installation
The On-Q 3x4 Enhanced Bi-directional Video Amplifier is typically installed during “trim-out” or as an
upgrade for an existing installation.
CATV input
gain control
Figure 1
RF outputs for
distribution
CATV
input
Aux
inputs
