LEGRAND NEAT NOVO, Техническое руководство

Страница: 32 / 44

32
NOVO Technical Handbook - NE41 15013-02 v2.0
5.7.2 SCAIP over IP/GSM
The way NOVO communicates with a digital alarm receiver requires additional
parameters. Following is an example of such a configuration showing some of these
parameters.
Step Call type Carrier type Call attempts
1 A IP 2
2 B GSM 2
Table 16. The steps in the sequence used.
In this example NOVO will, after 2 failed call attempts, change carrier from IP to GSM.
When calling a digital alarm receiver either an IP address is used or as in this case a
DNS hostname (www.any-url.com is used here as an example). A communication port
has to be defined and in some cases login credentials as well.
Call type Address/phone number Protocol Port Username Password
A www.any-url.com SCAIP 555 username password
B www.any-url.com SCAIP 555 username password
Table 17. Example of some call type parameters.
5.7.3 NEAT Talk/CPC to an analogue alarm receiver
Below is an example of the relevant sequence steps and call type parameters for this
example.
Step Call type Carrier type Call attempts
1 B IP 3
2 C GSM 2
Table 18.
Example of parameters for steps in a sequence.
Call type Address/phone number Protocol Port Username Password
B +4646555123@any-url.com CPC 5060 username password
C +4646555123 NEAT Talk 45005 username password
Table 19. Example of call type parameters.