Catalogue number(s): 0 463 00/06/12/18/19/21/22/23
0 463 28/29/30/33/34/35/41/42/43
19" LCS
2
freestanding cabinets
Technical data sheet: F01424EN/01
Updated on: 24/10/2014
Created on: 21/02/2012
17/31
7. CABLE MANAGEMENT
7.1 Cable entry plates
7.1.1 Presentation
19" LCS
2
freestanding cabinets have pre-cut 19" format top and
bottom cable entries.
600
800
After cutting out the cable entries, they can be equipped with
feedthroughs with brushes using the following 19" equipment:
The plastic plates Cat. Nos. 0 465 28/29 clip directly onto the cable
entries. They require a flat screwdriver for removal.
Cat. No.
Plate with brushes
0 465 28
Plastic 1U
0 465 29
Plastic 2U
0 465 30
Metal 1U
0 465 31
Metal 2U
CLICK
7. CABLE MANAGEMENT
(continued)
7.1 Cable entry plates
(continued)
7.1.1 Presentation
(continued)
The metal plates are equipped with 2 quick fixings that do not require
any screws or tools.
The 3U cable entries also enable the installation of plates with fans
Cat. Nos. 0 464 87/88 for thermal management of the cabinet (see
section 9.1).
7.1.2 Features
7.1.2.1 Plastic plates
ABS plates equipped with a flexible brush (2 brushes for 2U height).
Black RAL 9005
1U plate Cat. No. 0 465 28 (above):
- 2 feedthroughs 125 x 25 mm
- 1 central feedthrough 113 x 25 mm
2U plate Cat. No. 0 465 29:
- 2 feedthroughs 125 x 45 mm
- 1 central feedthrough 113 x 45 mm
1
2
Cat. No. 0 364 54
At the top of LCS
2
cabinets, the metal plates must be fixed
using screws and cage nuts with pins in order to provide
the equipotential link between the plate and the painted end
plate of the cabinet.
