LEGRAND 5739 94, Руководство по установке

Страница: 22 / 36

22
2 - Multimedia interface description
0 1 – A/V OUT : audio/video output for the connection of an external multimedia receiver (e.g.:
TV, monitor).
0
2 – D–SUB OUT
: connector for the connection of a monitor with D–SUB input.
Note: the signal found on this connector is in the PAL 720x576 format.
0 3 – A/V IN : audio and video input for the connection of an external source.
0 4 – MIC–IN : external microphone input (setting for future applications).
0 5 – USB Slave : Mini USB connector for connection to a PC for firmware update, configuration
and diagnostics.
0 6 – Serial connector : RS–232 serial connector for connection to a PC for firmware update, con-
figuration and diagnostics through 0492 34.
0 7 – Reset : RESET key.
0 8 – Power Supply : VAC power supply (100Vac – 60Hz and 240Vac – 50 Hz).
0
9 – USB Master
: USB connector for connection to devices such as mp3 players (setting for future
applications).
10 – SCS A/V OUT : connector for connection to the Legrand “SCS Video 2 wire bus”.
11 – DC–OUT : Constant 12Vdc voltage output (setting for future applications).
12 – IR TX : Connectors for the connection of infrared transmission cables.
13 – SCS A/V IN
: Connector for connection to the Legrand “SCS Video 2 wire bus”.
14 – ETH : Ethernet RJ45 Connector for connection to a TCP/IP network, compatible with a 10/100
Mbps speed.
A/V OUT
ETH
IR-TX1
A/V IN
SCS
A/V IN
SCS
A/V OUT
IR-TX2
1 2 3 4 5 6 7
8 9 10 11 12 12 13 14
Ethernet network
operation LED
IR LED
System LED
2.3 - Rear view