manualshive.com logo in svg

LEGO MINDSTORMS Robots, Руководство пользователя, Страница: 175 / 226

Поделиться
Скачать
LEGO MINDSTORMS Robots Скачать руководство пользователя страница 175

Page 193

your source code.

∗

 For example, if you saved the source code above in a file called 

/projects/HellolegOS.c

you would edit the 

Makefile's

 

TARGET

 like this:

TARGET=/projects/HellolegOS

Then type 

make

 at the command line. If everything is installed correctly, you'll end up with a 

HellolegOS.srec

 file in the same directory as the source file.

Trouble with Make

If you can't make 

HellolegOS.c,

 and you're starting to curse at your computer, take a deep 

breath. legOS has a strong online community; people will help if you ask. The "Online 
Resources" section of this chapter has pointers to helpful sites. One of the best things you 
can do is look at LUGNET, 

http://www.lugnet.com/

,

 and search through the discussion 

group archives for the particular problem you're having. There are at least as many 
messages about configuring the legOS development tools as there are about actually 
programming in legOS.

If you're using one of the online compilers,just copy the source into the web page and press the compile button. If there are no errors, you will get back an 

.srec

 file representing your compiled 

legOS program.

Regardless of how the source file is compiled, you will then need to download the 

.srec

 file to the RCX, using either 

nqc

 or 

firmdl

.

When the download is complete, your RCX will display the string "legOS" to indicate that legOS is running. To actually run the program you just wrote, press the 

Run

 button. The display will 

show "Hello" for a second or so, then show two zeros. The left number shows the result returned from our 

main()

 function. Control has now returned to legOS; you can use the 

On-Off

 button 

to switch the RCX off and on. When the RCX is on, you can press 

Run

 again to see the "Hello'' message again. Show your friends and family; they will be awed and inspired.

Function Reference

Once you've seen one RCX development environment, you've seen them all—to some degree, at least. If you've been reading through this book in order, you've probably noticed that NQC and 
pbFORTH have similar commands but different syntax. Likewise, legOS has a set of functions that looks a lot like pbFORTH and

∗

 Make sure you've edited 

Makefile.common.

 The 

TOOLPREFIX

 and 

LEGOS_ROOT

 lines should point to the appropriate directories on your system, as described in the comments. Make sure you put 

a trailing slash on the 

LEGOS_ROOT

 directory.

Page 194

NQC, but the syntax and usage is slightly different. In this section, I'll describe the important functions of legOS and demonstrate how they are used.

There are, of course, different levels at which you can use legOS. I'll describe the "user-level" functions, meaning the functions you can call without knowing much about what's inside legOS. If 
you're looking for even more power, the full source code of legOS is freely available; you can read it, debug it, or reprogram it as much as you'd like.

∗

Using the Display

legOS is surprisingly capable when it comes to managing the display on the RCX. Aside from just displaying numbers, you can ask legOS to approximate a text string using the display, as we did 
in the 

HellolegOS.c

 example.

Numbers and symbols (rom/lcd.h)

Most of the useful display functions are defined in 

rom/lcd.h.

 The first function you should learn is 

lcd_refresh()

:

void lcd_refresh(void)

This is the function that makes it all happen. After you call any other display function, you must call 

lcd_refresh()

: to actually update the display.

Содержание MINDSTORMS Robots



































































































































































































































Отзывы:

Нет отзывов