manualshive.com logo in svg

LEGO MINDSTORMS Robots, Руководство пользователя, Страница: 173 / 226

Поделиться
Скачать
LEGO MINDSTORMS Robots Скачать руководство пользователя страница 173

Figure 10-1.

legOS software architecture

Development Tools

You'll need some heavy-duty tools to work with legOS. (There is another possibility, as described in the sidebar, ''An Innovative Alternative.") The good news is that the tools are free. The basic 
tool you need is a cross compiler, a tool that runs on one platform but produces executable files for another. In this case, you want a cross compiler that runs on your PC and produces firmware for 
the RCX.

Page 191

legOS is built using 

egcs,

 the open-source successor to the GNU 

gcc

 compiler. To build legOS, you'll also need GNU's 

binutils

 package. These tools are present on most Linux systems, 

but they must be reconfigured to support cross-compilation for the RCX. I'll explain this process soon.

If you're not running Linux, don't despair. On a Unix-like operating system, you can probably build 

egcs

 and 

binutils

 yourself, or find someone who has binaries for your platform. See the 

"Online Resources" section later in this chapter for information on obtaining 

egcs

 and 

binutils

.

Cygwin

What if you're not running Linux or a Unix-like operating system? If you have Windows instead, there is a way to make Windows act like Linux. The Cygwin package from Cygnus Solutions is a 
port of many GNU tools to Windows 95, 98, and NT. Like lots of GNU stuff, it's a little bulky. A full download is about 13 MB, compressed. If you're a Linux enthusiast trapped in a Microsoft 
world, though, you'll definitely want to check this out. (The "Online Resources" section has more information on obtaining Cygwin.)

Setting Up egcs

To compile legOS, you're going to need to configure 

egcs

 as a cross compiler for the RCX. There are two ways to do this:

1. You can recompile 

egcs

 itself to make it into a cross compiler.

2. You can download someone else's binary version of the 

egcs

 cross compiler.

Obviously, the second option is a lot easier, if you can find somebody who's created the cross compiler for your particular platform. The "Online Resources" section at the end of this chapter lists 
web sites that contain instructions for recompiling 

egcs

 as well as the locations of popular binaries of the cross compiler.

Oh, and Perl Too

Содержание MINDSTORMS Robots



































































































































































































































Отзывы:

Нет отзывов