LEG
GLIDE
Figure 3
CROSS
ARM
CROSS ARM
OUTER
CROSS ARM
CENTER
CROSS ARM
OUTER
THREADED
HOLES
Assembled View
CROSS ARM and tighten securely by hand.
Slide GLIDES onto each LEG. See Figure 3.
Step 1
Depress SNAP BUTTONS on CENTER
CROSS ARM and slide into OUTER CROSS
ARM until it locks in the appropriate holes as
detailed in Figure 1.
Important: Make sure
THREADED HOLES are facing the same
direction.
Repeat until all cross arms are
assembled.
Step 2
Slide CROSS ARM ASSEMBLIES in
place between SIDE RAILS as shown in Figure 2.
Note: Threaded holes should be underneath.
Step 3
Screw LEGS into threaded holes of each
P56 PRESTIGE BED FRAME
ASSEMBLY INSTRUCTIONS
DO NOT SCALE DRAWING
DATE
DWG. NO.
SHEET 2 OF 4
99301246
12-08-11
CROSS ARM
ASSEMBLY
Figure 2
ASSEMBLY
SIDE RAIL
SIDE RAIL
CROSS ARM
CROSS ARM
ASSEMBLY
King
Figure 1
Queen
SNAP
BUTTONS
California
King
