DWG. NO.
DATE
SHEET 1 OF 4
DO NOT SCALE DRAWING
99301246
12-08-11
CROSS ARM
Figure 2
ASSEMBLY
ASSEMBLY
SIDE RAIL
SIDE RAIL
CROSS ARM
CROSS ARM
ASSEMBLY
ASSEMBLY INSTRUCTIONS
P34 PRESTIGE BED FRAME
Step 1
Depress SNAP BUTTONS on CENTER
CROSS ARM and slide into OUTER CROSS
ARM until it locks in the appropriate holes as
detailed in Figure 1.
Important: Make sure
THREADED HOLES are facing the same
direction.
Repeat until all cross arms are
assembled.
Step 2
Slide CROSS ARM ASSEMBLIES in
place between SIDE RAILS as shown in Figure 2.
Note: Threaded holes should be underneath.
Step 3
Screw LEGS into threaded holes of each
CROSS ARM and tighten securely by hand.
Slide GLIDES onto each LEG. See Figure 3.
Assembled View
LEG
GLIDE
Figure 3
CROSS
ARM
OUTER
CROSS ARM
OUTER
CROSS ARM
CROSS ARM
CENTER
THREADED
HOLES
Figure 1
Twin
Full
SNAP
BUTTONS
