background image

8

WARRANTY

LEGGETT & PLATT 20-YEAR LIMITED WARRANTY

Leggett & Platt, Incorporated (“L&P”) warrants this  P-2000 Bed to the consumer who is the original purchaser
(the “Purchaser”), subject  t o the terms and conditions set forth herein.  This warranty begins on the “warranty
commencement date” which is the date of purchase for new, unused beds and the date of manufacture for
beds that have been used as floor or display models.  [Thus, on a floor model bed, the warranty is a portion
of the limited 20-year warranty.]

FULL ONE-YEAR WARRANTY

This  P-2000 Bed is warranted against  defects in the workmanship or materials for a period of one year
from the warranty commencement date.  Upon notice during the first year after the warranty Commencement
date, L&P will repair or replace at no cost to the Purchaser any defective  P-2000  part, and L&P will pay all
authorized labor and transportation costs associated with the repair or replacement of any parts found to be
defective.

LIMITED FIVE-YEAR WARRANTY

During the second through the fifth years from the warranty commencement date, upon receipt of notice,
L&P will replace any P-2000  part found to be defective.  This limited five year warranty shall not apply
unless the defective part is returned to L&P within ten (10) days of Purchaser’s receipt of the replacement
part.  Purchaser shall pay all service and transportation costs related to the replacement of the defective
part.

LIMITED TWENTY-YEAR WARRANTY

Upon notice during the sixth through the twentieth years from the warranty commencement date, L&P will
replace, upon terms and conditions set forth in this paragraph, any P-2000 part found to be defective.
Purchaser shall pay 1/180 of the then current replacement cost of the defective part  multiplied by the
number of months after five (5) years from the warranty commencement date, and L&P shall bear the
remainder of the cost of the replacement part.  This twenty (20) year warranty shall not apply unless the
defective part is returned to L&P within ten (10) days of Purchaser’s receipt of the replacement part.
Purchaser shall pay all service and transportation costs related to the replacement of the defective part.
After the twentieth year, Purchaser shall bear the entire cost of repair and replacement of all parts and
materials, including labor and transportation.

ADDITIONAL TERMS AND CONDITIONS

This warranty does not apply; (a) to any damage caused by the Purchaser; (b) if there has been any repair
or replacement of P-2000 parts by an unauthorized person; (c) if the P-2000 has been mishandled (whether
in transit or by other means), subjected to physical or electrical abuse or misuse, or otherwise operated in
any manner inconsistent with the operation and maintenance procedures outlined in the Owner’s Manual
and this warranty; (d) to damage to mattresses, fabric, cables, electrical cords or items supplied by dealers.
[Contact the dealer for warranty information on these items.]; (e) if there has been any modification of the
P2000 without prior written consent by L&P; (f) to costs for unnecessary service calls, including costs for in
home service calls solely for the purpose of educating the consumer about the P-2000 or for finding a
satisfactory power connection; (g) if the recommened weight restrictions are not followed (300-Twin; 375-
Full; 425-Queen), the warranty will be void.

Содержание P-2000












Отзывы: