TROUBLE SHOOTING
ELECTRICAL
If the bed does not operate:
•
Check the power cord to see that it is securely plugged into the electrical outlet.
•
Check the outlet by plugging in a lamp or another electrical device.
•
Replace batteries in the remote hand control.
•
Perform the Auto Learn Feature outlined on your Remote Operation page.
•
If bed still does not work, contact:
Leggett & Platt
Warranty Service Department
P.O. Box 140
Linwood, NC 27299
1-800-888-3078
FOR BEST RESULTS, YOUR BED SHOULD BE PLUGGED INTO A SURGE PROTECTOR.
NOISE CONCERNS
Because of the free fall safety design, the wheels of the lift arm should come into contact with the platform
boards slightly to place tension on the mechanism and reduce a potential noise problem.
The level of noise emitted in most cases is directly proportional to the acoustics of the room where the bed
is placed. Thus, when a bed is on a hardwood floor and the massagers are running, it will transmit the noise
and sound like a base drum. To minimize this noise, place a piece of carpet or a rubber caster cup under
each caster. (Rubber caster cups can be purchased at your local dealer or by calling Customer Service at
1-800-888-3071.)
When the bed is operated, there will be a harmonic hum from the lift motors. This is normal.
LUBRICATION
The lift motors are permanently lubricated. No additional lubrication will ever be required.
Do not apply lubricant to the lift motor lead screw or to the nylon nuts. Any lubrication to these parts may
cause your bed to creep down from the elevated position.
7
Please have your Model Number, Serial Number and Date Of Purchase available when
calling. If possible, please be in the same location as the bed before calling.
