background image

1

WARNINGS

WARNING! IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT.

Your Adjustable Bed has been totally engineered to provide you with reliability of operation and the strength
you deserve.  The manufacturer has given each bed a thorough inspection and testing prior to shipment.
The utmost in comfort and safety has been provided for you.  This bed is for HOME use only.  It is NOT
designed for hospital use and was not designed to meet hospital standards.  Do not use bed with TENT
TYPE oxygen therapy equipment, or near explosive gases.

GROUNDING SAFETY

This Adjustable Bed has a grounded plug (two flat blades and one round pin) as a safety feature to reduce
the risk of electric shock.  The plug will only fit into a grounded outlet one way.  If this plug does not fit into your
outlet, contact a qualified electrician and have them install a properly grounded outlet.  NEVER REMOVE
THE GROUNDING PIN OR ALTER THE PLUG IN ANY WAY.  

 Unauthorized modifications could void the

electrical portion of your warranty. 

  The use of adapters is not recommended unless the outlet is checked

by a qualified electrician to ensure the proper grounding of the adapter.  Failure to use a properly grounded
outlet for this product will compromise this important grounding safety feature and may result in electrical
shock, electrical fire, or faulty operation of the product.  

FOR BEST RESULTS, YOUR BED SHOULD BE

PLUGGED INTO A SURGE PROTECTOR

 (not supplied with this adjustable bed).

WARNING!

Do not open

 control box, motors or hand controls (with the exception of the battery  compartment).  The

warranty is  

void

 if these units are tampered with.  Any repair or replacement of adjustable bed parts must

be implemented by an authorized person.

IMPORTANT SAFETY FEATURE

This Adjustable Bed is equipped with a special locking caster for your safety.  In order to prevent the movement
of this product, all four casters should be locked in position.  This may be accomplished by pushing down
the safety latch on the caster.  To resume mobility of the product, lift up on the safety latch.  You are strongly
encouraged to place rubber caster cups or carpet squares under the casters in addition to locking them in
place if the product is positioned on a hard surface floor such as hardwood, tile or linoleum.  Although your
casters are locked and will not roll, they may slide.  

Note:  To avoid damage to flooring, casters must

be installed before operating the bed.  Failure to attach casters my void warranty.

Содержание P-2000












Отзывы: