8
ASSEMBLY
MATTRESS
RETAINER
MATTRESS RET
AINER
INSER
TS (FOOT END
OF BASE)
FIGURE 7
STEP 10
Rotate base over onto its legs.
STEP 11
Operate remote control to verify base functions properly.
If base does not operate, see the Troubleshooting
section.
STEP 12
Lower base to flat position.
DUE TO RISK OF INJURY, TWO ADULTS
ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
WARNING
!
STEP 13
Install the mattress retainer. Place one end of the mattress retainer into
the outside hole of the left insert and place the other end into the outside
hole of right insert (FIGURE 7).
STEP 14
Place mattress on base to complete assembly.
