10
TANDEM SYNCING
To tandem sync two bases to operate as one base, perform the followning procedure:
MALE END
(CONNECTS
TO BASE 1)
FEMALE END
(CONNECTS
TO REMOTE
CONTROL)
MALE END
(CONNECTS
TO BASE 2)
FIGURE 8
SYNC CABLE
STEP 1
Locate the sync cable (FIGURE 8).
STEP 2
Unplug both remote control cords from respective
base motor cables.
STEP 3
Plug one male end of sync cable into motor cable of
base 1; place the other male end of sync cable into
motor cable of base 2.
STEP 4
Plug (1) remote control cord into female end of sync
cable. Second remote is not needed. Retain for future
use.
One remote control will now operate both bases.
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING
!
