300 N. Opdyke Rd.
Auburn Hills, MI 48326
www.legendvalve.com
800-752-2082
Legend Valve & Fitting, Inc.
Item # 508-280
Auburn Hills, MI
www.legendvalve.com
Legend Crimp Tool
Installation Guide
Making A Crimp Connection
1. Cut tubing squarely. Remove any burrs.
2. Slide crimp ring over end of tubing. Insert fitting into end of tubing until it stops at
shoulder, covering all three barbs. Position crimp ring 1/8” to 1/4” from end of tubing and
fitting shoulder.
3. Place the crimping end of tool jaws around the center of the crimp ring and press the
handles together. Be certain to fully close the jaws of the tool.
4. Check for proper crimp with the Go/ No-Go gauge.
2
1
3
4
The Legend Crimp Tool is designed for use with copper crimp rings in combination with brass insert fittings, meeting the
requirements of ASTM F1807 or plastic insert fittings meeting the requirements of ASTM F2098. The Legend Crimp Tool should
only be used on crimp fittings and flexible plastic tubing meeting the requirements of ASTM F876 / 877 or ASTM F2769.
Using GO/NO-Go Gauge
