sub
1 Pro DC DP
Dual Program Waterproof Controller
UPPER COVER
CONTROLLER
FLOW DIRECTION
BATTERY DOOR
PLASTIC VALVE
RELIEF LEVER
BRACKET
SOLENOID
1
#1
INSTALLATION INSTRUCTIONS
Mount the controller on the wall, using the wall mount bracket
or on the valve, using the valve mounting bracket.
Connect the solenoid wires to the controller.
Connect RED fromsolenoid to RED fromcontroller and the
same for the BLACK wire.
Use the WaterProof Crimp Connectors to make the connections.
Connect the wires FIRST before installing the battery!
When battery is connected the controller checks the valves position
to make sure they are closed!
9 VOLT VALVE
A 9 volt, pulse operated
solenoid must be used
with this controller.
It is also refer to as:
9 volt Latching solenoid
The solenoid could be
2 ways or 3 ways, with
2 wires with different
colors (like Red & Black)
3 WAYS SOLENOID
CONTROLLER MOUNTED ON THE VALVE
Instruction Manual
1
CONTROLLER MOUNTED ON THE WALL
DP-1Pro
DP-1Pro
