LeeBoy 8510E, Руководство по эксплуатации, обслуживанию и запасным частям

Страница: 109 / 444

55
LeeBoy Model 8510E Conveyor Paver 5-19
Maintenance
Alternator
The alternator supplies electrical power to electronic
controls and charges the battery. Its built-in regulator
controls voltage output.
(Figure 5-23)
Figure 5-23. Alternator
Use the following precautions to prevent damage to the
alternator or regulator:
• Never polarize the alternator.
• Never ground any alternator terminals or circuits.
• Always disconnect the battery before disconnecting
or connecting the alternator.
• Never disconnect the alternator while machine is
operating.
• Ensure wiring is properly connected before
connecting the battery.
• Always connect a booster battery in the proper
polarity: negative (-) to negative (-) and positive (+) to
positive (+).
Electric Heat Control Box
(Option)
The electric heat control box contains the element
breakers and main outputs for the screed heating
system . Powered at 240 VAC, each element has two
circuit breakers. (Figure 5-24) Refer to the electrical
schematic in Section 6 for detailed information.
1
2
3
4
5
7
8
6
Figure 5-24. Electric Heat Elements
1 - Generator Circuit Breaker
2 - Generator Speed Controller
3 - Element Circuit Breakers
4 - Power On Toggle
5 - Heat On Button
6 - Toggle for Left/Right Endgates
7 - Wire Junction Block
8 - Heating Element Relays