DECAPPING DIE
7
34307
90292
6
INSTRUCTIONS:
Screw decapping die into press until it touches the shell holder
and tighten the lock ring finger tight. The decapper is retained by a collet. Should it
be overstressed by an obstruction, it simply slides up without damage. To
reset, loosen the decapper clamp and position the decapper flush with the
clamp end and tighten.
Considerable torque force may be necessary.
A ½
"
and ¾
"
wrench are required. Replacement decapper, order #90783
DECAPPING DIE
LD
2546
7
34307
90292
6
WARNING:
Steel parts may be alloyed with trace amounts of lead and other
elements, which are known to the state of California to cause reproductive harm and
cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure,
do not alter the product by welding, grinding, etc.
4275 COUNTY ROAD U · HARTFORD WI 53027
www.leeprecision.com
Works on cases up to .560” in diameter and up to 3.125” long
©2020 PRINTED IN USA
