background image

POWER RELAXOR FEATURES 

AND INFORMATION

 

FEATURES

110V WALL PLUG – NO CHARGING REQUIRED

USB PORT LOCATED AT TOP OF THE

CONTROL BOX

POWER MECHANISM ALLOWS A SMOOTH

RECLINE TO ANY POSITION WITH THE TOUCH
OF A BUTTON

INDEPENDENT SWITCHES ALLOW FOR

INDEPENDENT ADJUSTMENTS

SOLID WALNUT FRAME

INFORMATION

250 POUND MAXIMUM WEIGHT LIMIT 

DIMENSIONS

OVERALL W28 D36 H43
INSIDE W22 D21 H27
SEAT HT 17
ARM HT 26

DEPTH AT REST POSITION 56
DISTANCE FROM WALL (REST) 7
DEPTH AT FULL RECLINE 65
DISTANCE FROM WALL (RECLINE) 18

WARRANTY

3 YEAR WARRANTY ON MECHANISM FROM

DATE OF PURCHASE

5 YEAR WARRANTY ON MOTOR, SWITCH AND

TRANSFORMER FROM MANUFACTURE DATE

LIFETIME WARRANTY ON THE FRAME

WARRANTY MAY BE VOIDED WITH MISUSE, 
ABUSE, OR IMPROPER SERVICE BY CONSUMER.

FOOTREST AND  

BACKREST RECLINE

BOTH FOOTREST AND BACKREST HAVE INFINITE 
STOPPING POSITIONS 

TO RAISE THE FOOTREST, PRESS THE FOOTREST 
RECLINE BUTTON LOCATED NEXT TO THE USB PORT. 
ONCE DESIRED POSITION OF FOOTREST HAS  
BEEN FOUND, RELEASE THE BUTTON TO REST IN 
POSITION. TO CLOSE FOOTREST, PRESS FOOTREST 
CLOSE BUTTON. 

TO RECLINE THE BACKREST, PRESS THE BACKREST 
RECLINE BUTTON. RELEASE THE BUTTON ONCE 
DESIRED POSITION HAS BEEN FOUND. TO CLOSE 
BACKREST, PRESS BACKREST CLOSE BUTTON UNTIL 
BACKREST RETURNS TO UPRIGHT POSITION. 

TO CLOSE BOTH FOOTREST AND BACKREST  
QUICKLY, PRESS THE REST POSITION BUTTON. HOLD 
UNTIL RELAXOR IS IN FULL UPRIGHT POSITION.

POWER MECHANISM

YOUR POWER RELAXOR IS EQUIPPED WITH A POWER 
CABLE CORD, 2 MOTORS AND A TRANSFORMER. 

TO KNOW IF YOUR POWER RELAXOR IS ON, A GREEN 
LIGHT WILL APPEAR BELOW THE TRANSFORMER. IT 
WILL FLASH BLUE WHEN OPEN AND ORANGE/GREEN 
WHEN CLOSED.

THE  FOLLOWING  INSTRUCTIONS  WILL  HELP  YOU 
IN  THE  EVENT  THAT  THE  CABLE  CORD  BECOMES 
DISCONNECTED FROM THE TRANSFORMER.

1. FULLY OPEN

(RECLINE) THE FOOTREST

2. UNPLUG POWER

CORD FROM OUTLET

3. TIP THE POWER

RELAXOR ONTO

ITS BACK

4. LOCATE THE

TRANSFORMER

UNDER THE BASE

OF THE CHAIR

5. LOCATED ON

THE RIGHT OF THE

TRANSFORMER

IS A FIGURE 8

POWER OUTLET

6. CONNECT POWER

CORD TO THE FIGURE

EIGHT OUTLET

7. PLUG POWER CORD

BACK INTO POWER

OUTLET AND CLOSE (RETRACT)

FOOTREST TO RESTING POSITION

USB Port

Footrest Recline

Footrest Close

Backrest Recline

Backrest Close

Rest Position

(footrest & backrest)

Отзывы: