background image

IMPORTANT:

           

The manufacturer will not accept liability for any resulting damages caused 

by the non-observance of this manual or any unauthorised modification to the 

equipment.

 

• 

Never let the power-cable come into contact with other cables. Handle the 

 

 

power-cable and all mains voltage connections with particular caution!

 

• 

Never remove warning or informative labels from the equipment.

 

• 

Do not open the equipment and do not modify the equipment.

 

• 

Do not connect this equipment to a dimmer-pack.

 

• 

Do not switch the equipment on and off in short intervals, as this will reduce the 

  system’s 

life.

 

• 

Only use the equipment indoors.

 

• 

Do not expose to flammable sources, liquids or gases.

 

• 

Always disconnect the power from the mains when equipment is not in use or before  

 

 

cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling  

 

 

the power-cable.

 

• 

Make sure that the available voltage is between 110v/240v.

 

• 

Make sure that the power-cable is never crimped or damaged. Check the equipment  

 

 

and the power-cable periodically.

 

• 

If the equipment is dropped or damaged, disconnect the mains power supply 

                      immediately. Have a qualified engineer inspect the equipment before 

                      operating again.

 

• 

If the equipment has been exposed to drastic temperature fluctuation (e.g. after    

 

 

transportation), do not switch it on immediately. The arising condensation might dam 

 

 

age the equipment. Leave the equipment switched off until it has reached room    

 

 

temperature.

 

• 

If your product fails to function correctly, discontinue use immediately. Pack  

 

 

 

the unit securely (preferably in the original packing material), and return it to your   

 

 

Prolight dealer for service.

 

• 

Only use fuses of same type and rating.

 

• 

Repairs, servicing and power connection must only be carried out by a qualified    

 

 

technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.

 

• 

WARRANTY; One year from date of purchase.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the 

product may suffer damage and the warranty becomes void.

Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks, 

lamp failure etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and property!

LEDJ P85 5.5 x 4M Pixel Cloth System   

 

 

 

 

                          Safety

2.

Содержание LEDJ P85

















Отзывы: