www.prolight.co.uk
ECO LED Par 56
User Manual
4
Operating instructions
DMX channel selection:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to
customising or creating a show. In this mode you will be able to control each individual trait of the fixture
and each fixture independently.
To access the DMX channel mode plug in the fixture via the XLR connections to a DMX controller. Set your
desired DMX address following the set-up specifications that come with your DMX controller.
Sound active mode:
To access this mode plug the fixture in and put dipswitch #10 in the
“ON”
position. The fixture will now
react to sound.
To exit this mode put the dipswitch in the
“OFF”
position.
Auto mode:
To access this mode plug the fixture in and put dipswitch #9 and 10 in the
“ON”
position. The fixture will
now chase through the colours. To adjust the speed put the dipswitches #1 to 7 in the
“ON”
position
(1 being the slowest, 7 being the fastest).
To exit this mode put the dipswitches in the
“OFF”
position.
RGB mode:
To access this mode plug the fixture in and put dipswitch #8, 9 and 10 in the
“ON”
position.
Dipswitch #1 placed in the
“ON”
position will project red at 25% intensity, whilst dipswitch #2 will
project at 50% intensity. Combining both dipswitches #1 and 2 will project red at 100% intensity.
Dipswitch #3 placed in the
“ON”
position will project green at 25% intensity, whilst dipswitch #4 will
project at 50% intensity. Combining both dipswitches #3 and 4 will project green at 100% intensity.
Dipswitch #5 placed in the
“ON”
position will project blue at 25% intensity, whilst dipswitch #7 will
project at 50% intensity. Combining both dipswitches #5 and 6 will project blue at 100% intensity.
To exit this mode put the dipswitches in the
“OFF”
position.
Master/slave mode:
For master/slave operation, set the first fixture (master) into sound, auto or RGB mode. Now set the
remaining fixtures into slave mode by setting dipswitch 1 to the
“ON”
position and all other dipswitches to
the
“OFF”
position.
To exit this mode put the dipswitches in the
“OFF”
position.
3 channel mode:
Channel
Value
Function
1
0-255
Red (0: low brightness, 255: high brightness)
2
0-255
Green (0: low brightness, 255: high brightness)
3
0-255
Blue (0: low brightness, 255: high brightness)
Содержание ECO LED Par 56
Страница 1: ...ECO LED Par 56 User Manual...
Страница 8: ...www prolight co uk ECO LED 56 Can User Manual 8...
