MESH LED POWER SUPPLY ZSL-25-12, ZSL-35-12, ZSL-60-12, ZSL-100-12, ZSL-150-12
MANUAL INSTRUCTION
ZAMEL
Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com
, e-mail: [email protected]
plik: Instrukcja ZSL-25_35_60_100_150 EN | modyfikacja: 21.03.2017
FEATURES
DESCRIPTION
● For use in household LED installa-
tions.
● 12 V DC output voltage of high
stability.
● Wide range of output power.
● Overvoltage and short-circuit protec-
tions.
● No-load operation resistance.
● Free mounting indoor only.
● Output voltage adjustment by means
of a potentiometer within a minimum
range of 10% nominal voltage.
ZSL series switched-mode power sup-
plies are designed for a direct use in
home LED lighting installations. Their
modular construction allows for an easy
and comfortable mounting indoor to hor-
izontal and vertical surfaces. The 12 V
DC output voltage power supplies are
available in a wide range of output power
(25÷150 W). The built-in protections guar-
antee a continuous and undisturbed oper-
ation of all connected LED elements. The
power supplies are equipped with output
voltage adjustment within the minimum
range of ±10% by means of a potentiom-
eter. Metal casing ensures proper power
supply cooling and prolongs its life.
The device is designed for a sin-
gle-phase installation and must be
installed in accordance with stan-
dards valid in a particular country.
The device should be connected
according to the details included in this operat-
ing manual. Installation, connection and control
should be carried out by a qualified electrician
staff, who act in accordance with the service
manual and the device functions.
In case of casing dismantling an electric shock
may occur, and the guarantee is lost then. Be-
fore installation make sure the connection ca-
bles are not under voltage. The cruciform head
screwdriver 3,5 mm should be used to instal the
device. Improper transport, storage, and use
of the device influence its wrong functioning.
It is not advisable to instal the device in the fol-
lowing cases: if any device part is missing or
the device is damaged or deformed. In case of
improper functioning of the device contact the
producer.
CAUTION
TECHNICAL DATA
The symbol means selective
collecting of electrical and
electronic equipment.
ZSL-25-12 ZSL-35-12 ZSL-60-12 ZSL-100-12 ZSL-150-12
Input parameters
Input voltage range:
110÷260 V AC
Input frequency range:
50 / 60 Hz
Input current:
0,3 A
0,38 A
0,65 A
0,85 A
1,05 A
Power supply cons-
umption during no load:
~0,5 W
~0,6 W
~1,5 W
~0,9 W
~3,9 W
Efficiency:
85 %
75 %
80 %
83 %
83 %
Power factor:
0,5
Output parameters
Nominal output voltage:
12 V DC
Nominal output current:
2,5 A
3 A
5 A
8,5 A
12,5 A
Output current range:
0÷2,5 A
0÷3 A
0÷5 A
0÷8,5 A
0÷12,5 A
Nominal output power:
25 W
35 W
60 W
100 W
150 W
Ripples and noises
(max):
200 mVpp
U adjustment range:
10,5÷13,5 V 8,5÷13 V 11,3÷13,2 V 11,5÷12,8 V 10,8÷15 V
Voltage tolerance:
1 %
Output voltage time
increase (max):
~15 ms
Output backup time
(max):
~80 ms
Other parameters
Overload protection:
Yes – returnable (app. 180÷200% Pn)
Output short-circuit
protection:
Yes – returnable
Thermal protection:
No
Resistance to idle
state:
Yes
Operating temperature:
-20÷60°C
Protection class:
I
Overvoltage category:
II
Casing protection
degree:
IP20
Mounting:
free
Operating position:
Free (horizontal or vertical plane)
Dimensions (mm):
87x59x32,5 87x59x32,5 110x78x36,5 162x99x42 200x98x42,5
Weight:
100 g
115 g
195 g
340 g
385 g
Reference standard:
PN-EN 55015, PN-EN 61547, PN-EN 6100-3-2,
PN-EN 6100-3-3, PN-EN 61347-1
