Ledco HD-25, Инструкция по эксплуатации

Страница: 8 / 52

1-3 OPTIONS
•
Power Feed Tray is designed exclusively for the HD-25, this power feed tray has
received good reviews for its easy setup and accuracy. Autofeeding is the first step
toward automated lines and lower production costs. A separate specification sheet
is available.
•
2 ¼-inch supply roll mandrels are available at no additional charge at time of
purchase in place of the standard 3-inch mandrels.
•
Risers lift a machine off its work surface, allowing longer supply roll brackets
(extensions) to handle larger diameter rolls of film. Risers are not needed with a
stand.
•
Stand An extruded aluminum stand is designed to place the unit at optimum
feeding height and to provide a secure base. Casters are available for either stand,
but it is suggested they be removed for stability and safety once the machine is in a
permanent location.
•
Upper fan assembly. When running thicker films, additional cooling capacity
enables work to be run at a higher speed.
•
Scrap rewind. Enables cold lamination by removing the release liner material from
pressure sensitive adhesives, film and vinyls.
•
Footage counter. For accurate measurement of film usage.
•
Additional slitter heads. For multiple-up trimming.
7