Ledco HD-25, Инструкция по эксплуатации

Страница: 18 / 52

4-1 SAFETY PRECAUTION
DO NOT OPERATE THIS MACHINE UNTIL YOU HAVE READ AND FULLY
UNDERSTOOD THE FOLLOWING SAFETY PRECAUTIONS.
1. Never operate this machine without reminding yourself that a big laminator is a powerful and
potentially dangerous tool. If misused, used carelessly, or used without observing the rules
of safe operation, very serious injury can result.
2. Never operate this machine without all guards, housings, safety shields, stop switches or
other safety devices in place and fully operational.
3.
Never operate this machine unless you have been fully trained and have received and
understood all operating instructions. Make sure you know how the machine works and how
it is controlled.
4. Never operate this machine if it is not working properly or if you notice any abnormality in its
performance.
5. Never tamper with, rewire, or bypass any control or safety device on this machine.
6. Always keep all parts of your body clear of the laminating rollers, pull rollers, and heated
surfaces of the laminator when the power is on.
7. Remember that even after the machine has been turned off for some time, the laminator’s
heated parts, and adjoining parts, can remain hot enough to burn you.
8.
Never attempt to clean the heated areas or laminating and pull rollers while the power is on.
9. Never remove the machine housing or attempt any kind of maintenance without
disconnecting power to the unit.
10. Always be sure all persons are clear of the machine before advancing or reversing the
pressure rollers, especially when multiple operators or observers are present.
11. Never wear loose clothing, ties, jewelry or any item, which could be caught in the rollers or
machinery when operating the machine. Operators with long hair must put their hair up
before running the machine.
12. Always keep your hands clear of any slitter mechanism or blade except when the power is
off and you intend to adjust the mechanism or change a blade.
13.
Use casters only when the machine needs to be moved because casters raise the center of
gravity and increase the risk of tipping. Use a minimum of two people. Move slowly and
avoid any obstructions. Remove the casters when the machine is in its proper position.
NOTICE TO EMPLOYER: A copy of these safety precautions must be given to all operators, set-
up personnel, maintenance people, and supervisors of this machine. A copy should also be hung
on the machine readily accessible and visible to the operator. Additional copies are available
upon request.
IMPORTANT: Where a language barrier or insufficient schooling would prevent a person from
reading and understanding these safety precautions, you should either translate this information
or have it read or interpreted to the person, and get assurance that it is understood.
17