TROUBLESHOOTING
LED Bar light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
Ÿ
Conrm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
Have a electrician check all connections from the power supply, LED Color Controller to the RGB LED Light Bars.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 12V power.
LED Bar lights blink on, then go off
Ÿ
The power supply is not adequate for the length of LED Light Bars you are powering. Install a adequate Class 2 power supply.
LEDs farthest from the power supply are noticeably dimmer
Ÿ
This is the result of voltage drop. Decrease the length of the 12V power feed or use thicker power feed
wires between the 12V power supply and the
lighting bars
.
1-800-387-4081
RGB LED LIGHT BAR Kit
Model: KIT-LVHS-RGB-103-12V
4/4
Copyright @2014 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 10/07/2014
CONNECTING RGB LED BARS
Our RGB LED Bars are inter-connectable without any LED Bar connector Cable, but inter-connectable option is ideal for straight run of RGB LED Bars
OPTION 1:
.........
RGB LED BAR - 1
RGB LED BAR - 2
RGB LED BAR - 10
.........
RGB LED Bar Connector Cable with two connector end can connect two RGB LED Bars. RGB LED Bar Connector Cable comes in 12” or 40” length
OPTION 2:
RGB LED BAR - 1
RGB LED BAR - 2
RGB LED BAR - 3
RGB LED BAR - 10
RGB LED Bar Connector Cable (LV-HS-PC2)