LED World KIT-LVHS-RGB-103-12V, Важные инструкции

Страница: 2 / 4

2/4
IMPORTANT INSTRUCTIONS
WIRING FOR VOLTAGE DROP
Voltage drop is normal loss of voltage that occurs as power ows along a wire connection in a low voltage systems, and increases as the length of a wire connection is
increased. Wire length and thickness as well as total light wattage inuence the amount of voltage drop.
Recommended maximum wire lengths - 12VDC
Wire Guage (AWG)
20 AWG
18 AWG
16 AWG
20W 30W 50W 60W 90W 100W
13 FEET
21 FEET
34 FEET 22 FEET
14 FEET
9 FEET 5 FEET 4 FEET 3 FEET 3 FEET
4 FEET 5 FEET 7 FEET 8 FEET
13 FEET 11 FEET 7 FEET 7 FEET
INSTALLATION PLANNING
RGB LED Bars is a versatile color changing lighting product that can provide a superior lighting solution in a variety
of applications.
Recommend design steps before starting the installation process:
General questions based on lighting requirements:
Ÿ Where will your power supply be located
Ÿ How will you switch your LED lighting ON and OFF?
Ÿ What is the best layout conguration for your installation with wiring consideration?
WATTAGE CALCULATION
The RGB LED Bars have a label on each roll that indicates the voltage and wattage. Kit includes Class 2 Power Supply for 10pcs of 12” RGB LED Bars. To calculate the
wattage, measure the total length of LED Bar in your run multiplied by the wattage of the LED Bar. Remember that a power source should only operate at a maximum
80% of it’s rated capacity.
For example : 12 inch of LV-HS-RGB-12T2-1 x 3.2W = 3.2 Watts
Never Extend the Length of Bars in Kit.
Download Magnitude app for voltage drop calculations:
Android App IOS App
1-800-387-4081
Copyright @2014 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 10/07/2014
APPLICATIONS
BENEFITS
Ÿ
Ideal for under counter lighting & cove lighting
Ÿ
Architectural accenting
Ÿ
Extendable light bar & modular design
Ÿ
No dark zones and seamless connection
Ÿ
Easy to install with screw mounting brackets and clips
RGB LED LIGHT BAR Kit
Model: KIT-LVHS-RGB-103-12V
INSTALLATION GUIDE
1
2
3
2
3
Mounting clip must be placed within
4" (10cm) end and beginning.
Front Connector
1. Mark on mounting surface to align the LED Connect Bar.
2. Screw and x the mounting clip.
3. Push gently the LED Bar main into the mounting clips
Connect power at one end only! Secure wiring with wire clamps.