HUEDA™ RGBW RF Remote Control
1. Product Introduction:
Before you begin, read all warnings and installation instructions and save for future use.
1/2
Copyright © 2016 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
Model:
H-2819S
The HUEDA
™
RGBW handheld remote controller can
control 4 different zones wirelessly and has 3 color
save buttons. You can choose any color through
color wheel. Color can be selected through the
color wheel. Requires 3 AAA ALKALINE batteries(not
included).
1-800-387-4081
ledworldlighting.com ledworld.ca
4. Product Specications:
Operation Voltage
Operation Frequency
Dimensions
4.5V DC
434 MHZ / 868 MHz
48 x 140 x16mm (1.88 x 5.51 x 0.62 inch)
Transmitting Distance
100 ft (30 meter)
2. Buttons Instructions:
Indicator: indicate the state of
remote control
White channel: the 4th channel
ON/OFF of all zones
4 zones: each zone can save
3 color or modes
Brightness: dim up
Brightness: dim down
S1
S2
S3
W
W+
Running button/Speed button
ww nw and cw mixed by RGB
Color save button
(press and hold to save
desired color)
Color wheel
Batteries (Back side)
3. Pair/Unpair Guide:
To
Pair
with HUEDA
™
RF Controller, press the learning button on HUEDA
™
RF Controller, and then on
HUEDA
™
Remote Controller press the desired zone button and then change the color via color wheel on
Remote controller. Connected LED light will blink that confirms Pairing. To
Unpair
press the learning
button on HUEDA
™
RF Controller for about 5 seconds, then Connected LED light will blink that confirms
Unpairing
Ÿ
Four zones/areas
Ÿ
Press-button RGB+W controller
Ÿ
Receivers work with WIFI-RF converter to be controlled by smart
phone device
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 02/01/16
