2/4
FLEX STRIP CONNECTION
-
Wire connection using WAGO block connectors
Class 2 Power Source
AC120V
LED Flex Strip
WAGO
Cut instructions
-
Solder Connection Points
Solder connection points are at marked intervals.
Cut points are at every 6 LEDs (24VDC)
Note Polarity Marks
+
-
+
-
Polarity marks must match
((+) to(+) and (-) to (-))
otherwise strip will not work
INSTALLATION PLANNING
Ÿ
How will you switch your LED lighting ON and OFF?
LED Flexstrip is a versatile lighting product that can provide a superior lighting solution in a variety of applications.
General questions based on lighting requirements:
Ÿ
How will you run your wiring to your LED strip lighting?
Recommend design steps before starting the installation process:
Ÿ
Where will your power supply be located
Ÿ
What is the best layout configuration for your installation with wiring consideration?
WATTAGE CALCULATION
For example : 10 feet of HH-S2835X-120-24V-C x 5.5W = 55 Watts
Never Extend the Length of rolls. Rolls are sold in there max length.
The LED Flex Strips have a label on each roll that indicates the voltage and wattage. You must have the correct Class 2 Power Supply (Transformer)
for LED Strip model. To calculate the wattage, measure the total length of LED Strip in your run multiplied by the wattage of the LED Strip. Remember
that a power source should only operate at a maximum 80% of it rated capacity.
IMPORTANT INSTRUCTIONS
50mm (1.96”)
+
+
+
+
-
-
-
-
WIRING FOR VOLTAGE DROP
Voltage drop is normal loss of voltage that occurs as power flows along a wire connection in a low voltage systems, and increases as the length of a
wire connection is increased. Wire length and thickness as well as total light wattage influence the amount of voltage drop.
LED Strip is equipped with 3M self-adhesive tape. Mount strips on clean (no wax/oil), dry, smooth, burrows free surface. Adhesion can be
made once and LED Strip must fully adhere to surface.
Use Aluminum profile or aluminum heat sink tape to avoid overheating ,
ensure proper heat dissipation and
extend the life of the LED
MOUNTING NOTE
-
-
-
-
°C
Download Magnitude app for voltage drop calculations:
Android App
IOS App
Recommended maximum wire lengths - 24VDC
Wire Guage (AWG)
20 AWG
18 AWG
16 AWG
20W
30W
50W
60W
90W
100W
27 FEET
42 FEET
67 FEET
45 FEET
28 FEET
18 FEET
11 FEET
9 FEET
6 FEET
5 FEET
8 FEET
9 FEET
14 FEET
17 FEET
27 FEET
22 FEET
15 FEET
13 FEET
LED FLEX STRIP - Constant Current IC
Model
: HH-S2835X-120-24V-C (X = COLOR W:Pure White / WW:Warm White / NW:Nuetral White)
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/15/21
