2/4
FLEX STRIP CONNECTION
Wire connection using WAGO block
connectors
Cut instructions
Solder Connection Points
100mm (3.93”)
Solder connection points are at marked intervals.
Cut points are at every 6 LEDs (24VDC)
Note Polarity Marks
G
R
B
G
R
B
G
R
B
RGBW LED Controller
AC120V
RGBW LED Flex Strip
Class 2 Power
Source
W
G
R
B
W
G
R
B
W
G
R
B
W
G
R
B
W
G
R
B
W
+
R
G
B
W
Ÿ
Cove Lighting
Ÿ
Task Lighting
Ÿ
Back Lighting
APPLICATIONS
Ÿ
Under Cabinet Lighting
Ÿ
Lighting Store
Ÿ
Display Lighting
Ÿ
Sign Lighting
Ÿ
Accent Lighting
IMPORTANT INSTRUCTIONS
WIRING FOR VOLTAGE DROP
Voltage drop is normal loss of voltage that occurs as power flows along a wire connection in a low voltage systems, and increases as the length of a
wire connection is increased. Wire length and thickness as well as total light wattage influence the amount of voltage drop.
INSTALLATION PLANNING
Ÿ
How will you switch your LED lighting ON and OFF?
LED Flexstrip is a versatile lighting product that can provide a superior lighting solution in a variety of
applications.
General questions based on lighting requirements:
Recommend design steps before starting the installation process
:
Ÿ
Where will your power supply be located
Ÿ
What is the best layout configuration for your installation with wiring consideration?
Ÿ
How will you run your wiring to your LED strip lighting?
WATTAGE CALCULATION
Never Extend the Length of rolls. Rolls are sold in their max length.
The LED Flex Strips have a label on each roll that indicates the voltage and wattage. You must have the correct Class 2 Power Supply (Transformer) for
LED Strip model. To calculate the wattage, measure the total length of LED Strip in your run multiplied by the wattage of the LED Strip. Remember that
a power source should only operate at a maximum 80% of it rated capacity.
For example : 10 feet of FC60M51-10M-24V-RGBW x 2.7W = 27 Watts
Mount Strips on Clean (No Wax/Oil), dry,
smooth, burrows free surface. Adhesion
can be made once and LED Strip must
fully adhere to surface.
IMPORTANT NOTE
Download Magnitude app for voltage drop calculations:
Android App
IOS App
Recommended maximum wire lengths - 24VDC
Wire Guage (AWG)
20 AWG
18 AWG
16 AWG
20W
30W
50W
60W
90W
100W
27 FEET
42 FEET
67 FEET
45 FEET
28 FEET
18 FEET
11 FEET
9 FEET
6 FEET
5 FEET
8 FEET
9 FEET
14 FEET
17 FEET
27 FEET
22 FEET
15 FEET
13 FEET
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Model
: FC60M51-10M-24V-RGBW
Copyright © 2022 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 08/22/22
OUTDOOR LONG RUN RGBW LED FLEX STRIP
