LED Strip Studio LEC3, Руководство пользователя

Страница: 39 / 43

39
Art-Net/DMX
Allows you to select between SD-card or Pixel mode for Art-Net and DMX
DMX/Art-Net mode
Set network address of Art-Net (1 to 128)
One universe of the incoming Art-Net universes can be used send out
from LEC3 device as standard DMX512 signal.
You can define which one it’ll be.
In case you use LEC3 in Art-Net SD-card mode, here you can define
which universe is used.
This is disabled in case you use Art-Net/DMX pixel mode.
In case you use some more simple DMX controllers, it’s sometimes
hard to set exact value of animation to play.
This setting allows you to set how many DMX steps will be used for one
animation.E.g. in case you set this value to 4, animation DMX channel
set to value 0, 1, 2 and 3 won’t play animation, animation DMX chan -
nel set to value 4, 5, 6, 7 will play animation 1 and so on. Thus, in case
you set this value to 4, you’ll be able to play only animations 1 to 63.
Art-Net net address
(1-128)
DMX OUT Universe
(1-256)
SD-Card mode universe
(1-256)
Default DMX address
(1-512)