LED Strip Studio LEC3, Руководство пользователя

Страница: 36 / 43

36
This allows you to display several test patterns on your LEC3 SPI output.
It’s practical to e.g. set the order of the RGB channels or type of the used LED strip
(LED IC). Don’t forget to press Stop Test after you finish to make sure, the device will stop
displaying test pattern!
White dimming is used for 4-th channel in case you use RGBW strips.
All dimming is used for all of the RGBW colors (all 0 to 255).
Here you can define type and color order of every SPI output.
•
Type
– type of the used LED control IC (chip), e.g. TM1809, WS2811, APA102, …
•
Color order
– order of the RGB channels. Some strips might use different order of
color channels than RGBW. This setting is used only for ArtNet, DMX and
Auto play mode. In software the order of channels is set by LSS software.
All these settings are used in Art-Net, DMX and Autoplay modes. In case you control
LEC3 from LSS software, you define these settings in the LED Strip Studio workspace.
Testing
Outputs