LeCroy Sierra M6-2, Руководство пользователя

Страница: 331 / 480

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 329
Scenario Properties LeCroy Corporation
Scenario Properties
To begin the scenario creation process, you click the New Scenario button in a library
window or on the InFusion application toolbar. As the first step in creating a scenario, the
application prompts you for scenario name, a short description (optional), and the
direction of traffic to which any traffic changes apply. Changes are, for example, injection
or removal of data or a primitive.
You identify direction of traffic change, or modification, in terms of traffic origin. The
application uses the following conventions:

From Initiator : Change is made to traffic coming from test host (for example, CRC
error is injected into traffic stream sent from initiator to target).

From Target : Modification is made to traffic coming from the target (for exam ‐
ple, CRC error is injected into traffic stream sent from target to initiator).
The figure shows the first prompt in the scenario creation process.
Figure 4.14: Entering Basic Scenario Information
To copy an event or action, right ‐ click on the event or action and select Copy .

Right ‐ click Click here to add another event or Click here to add an action and then select
Paste .
To copy a sequence or state, right ‐ click on the sequence or state and select Copy .

Right ‐ click Click here to add another sequence or Click here to add another state and
then select Paste .
You can also cut, delete, and edit a selected sequence, state, event, or action.