LeCroy Sierra M6-2, Руководство пользователя

Страница: 107 / 480

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 105
Advanced Mode (User ‐ Defined) LeCroy Corporation
6. Choose pattern(s) and click the +>> button to add them for capture or exclusion. You
define each pattern the same way as in Easy mode ( See “Defining Patterns” on
page 59. ).
7. For an output trigger, click the down arrow in the Ext. Out field and choose an
output trigger level. Note: Do not use the LOW setting in Advanced Mode.
8. To go to another state, click the down arrow in the Go To field and select a state. If
no other state has been defined, choose New State to add a state.
Multi-Link Triggering
You can set different triggering for each link. To set different trigger conditions for a link,
check the
Multi Sequencer check box and select the link for setup from the Port drop ‐
down list.
Figure 2.80: Multi-Link Triggering Setup
Set Timers
You can set and use up to three timers for triggering. You can set each timer for each state
or continue from a timer set in the previous state. The timer defined for a particular state
starts when entering that state. To set timers, click the
ellipses in the Timer field in each
state and define each of the timers in the Set Timers dialog.
Figure 2.81: Set Timers Dialog