LeCroy Advisor, Руководство пользователя

Страница: 105 / 174

USB Advisor User Manual Chapter 9: Decode Requests
LeCroy Corporation
97
Mapping Endpoint RPipe to Class/Vendor Decoding
To assign a Class/Vendor Endpoint RPipes decoding:
Step 1 Click the Apply Decoding Scripts button on the Toolbar.
OR
Left-click the Bulk/Int Transfer field to display the USB Device Request menu.
Step 2 Select Map Endpoint RPipe to Class/Vendor Decoding to display the Request
Recipients and Endpoints dialog box.
Step 3 Click the Endpoint RPipes tab to display the Endpoint RPipes dialog box:
The RPipe field shows all RPipes found in the trace file. The displays shows the
Otg Host, HWA address, and Direction for the recipient. On the right are the
names of Class/Vendor Endpoint Decoding groups currently assigned to
endpoints. If blank, no decoding is assigned for a recipient.
Step 4 Select an endpoint RPipe.
Step 5 Display the Class/Vendor Endpoint Decoding drop-down menu. The
Class/Vendor Endpoint Decoding options are the same as for Endpoints.
Step 6 Select the type of decoding.
OR
Select No Decoding if you do not want any specific decoding.
Step 7 Repeat the previous steps for any additional RPipes you would like to map.
Step 8 To retain a mapping from trace to trace DURING an application session, select
the
Keep Across Recordings checkbox.
Step 9 Click OK .