6(8)
Installation
Left or Right side installation
For a left side installation, switch place on support brackets, see “Assembly: Step 1 – Support brackets”.
This can be done at any time, during Assembly (Step 1-4).
Right side installation
Left side installation
Antenna installation
a)
Hoist and secure antenna to pipe (Ø90- Ø120mm) using 2pcs Clamp bracket (
1
) and 4pcs M10 flange nut (
2
).
b)
Position the antenna so it will point along the radio link path and then tighten nuts to torque of 49Nm ± 5%.
c)
Mount L-bracket (
3
) to Strut support bracket (
4
) using 1pcs M10x30 screw / 1pcs Washer M10 (
5
) and 1pcs M10 nut / 1pcs
Spring washer M10 / 1pcs Washer M10 (
6
). Fit screw finger tight.
d)
Mount Side strut (
7
) to L-bracket (
3
) using 1pcs M10x30 screw / 1pcs Washer M10 (
8
) and 1pcs M10 nut / 1pcs Spring washer
M10 / 1pcs Washer M10 (
9
). Fit screw finger tight.
2
1
6
3
4
7
5
8
9
