Leander 950 Series Operator Manual & Warranty
13
MAINTENANCE & TROUBLE-SHOOTING
LEANDER TABLES
are designed to provide exceptionally long life and dependability.
However, like any mechanical device they occasionally require minor service to keep
them in peak operating condition. This section will help you maintain the table and
identify minor irregularities and correct them before they become major disruptions in
your use of the table.
UPHOLSTERY
To clean the Naugahyde or vinyl on your LEANDER TABLE use warm, soapy water or
a specially blended Naugahyde or vinyl cleaner.
DO NOT use any alcohol-based
cleaners or abrasives. DO NOT use Armor-All, or other cleaners formulated for
automotive vinyl.
MECHLOKS
LEANDER TABLES have three mechanical locking devices called Mechloks.
They can
be found at the ankle cushion, lateral flexion lock, and the sliding flexion pushrod
of the table.
These devices incorporate a simple lock design capable of resisting a
great amount of force, yet they may be set or released with a minimum of effort. These
attributes allow the physician great flexibility. Adjust cable tension if Mechlok slides or
locks.
TABLE MAINTENANCE
Leander, LLC provide you with a superior product to the best of our ability. It is our main
objective to provide you with a product that should last for many years.
At times there may be some issues that may occur. The most common is motor sounds.
This product contains a Leeson Motor. We have found it to be the best quality and most
durable. Motor capacity is approximately 350 pounds. Like all electrical products, they
are subject to various currents that can cause the motor to make a louder sound at
times. If you feel the motor is increasing in sound within the first 6 months, please
contact us. New motors may take a few months to wear and will decrease in sound.
Your motor and gearbox have a one (1) year warranty. Be assured Leander will cover
it and do our best to resolve the matter as fast as possible.
ANNUAL MAINTENANCE: All tables are used at different levels of wear and tear. We
recommend basic maintenance once a year or as needed.
Check all bolts and screws that support the arm brackets, face cushions, thoracic
cushion, and pelvic cushion.
Use Lithium spray on the rollers of each drop mechanism.
Spray Lithium on each side of the rod that runs from the pelvic cushion to the gearbox
where the rod attaches to the cam inside the base cover. It is easy to reach with the
extended spray nozzle on the can. Doing this once or twice a year will keep motor
sounds down.
For those who have placed their tables on wood floors, ceramic floors, or vinyl floors
you will have louder table sounds. It is recommended that you place the table on a
rubber mat, carpet, or small rubber discs placed to place under the leg sliders.
Note: All operation of this Leander table is the sole responsibility of the operator.
