Leader PYROS 3, Руководство пользователя

Страница: 11 / 23

11
4.6 Remote control connection
After removing the protective cap of the connector, connect the remote control cable of the wired
remote control or the wireless remote control (cable of the radio receiver). The connection must
be done before any water filling operation of the tray to avoid wetting the electrical connector.
4.7 Filling the tray
Fill the tray with water to overflow through the side holes.
In use, the water evaporates due to the heat generated by the fire. These openings are a good
marker of the level of water. Make up the water when necessary.
Marker of the level of water
Drawing showing the connection
of the wired remote control.
Operate in the same way with the cable
of the receiver working with the wireless
remote control.
The radio receiver is fixed under the
control panel of the desk.