10. VIDEO SIGNAL WAVEFORM DISPLAY
92
CURSOR = X
CURSOR = Y
Figure 10-15 Cursor types
10.9.2
Moving Cursors
To move the cursors, follow the procedure below. Setting F•3 FD VAR TRACK and
pressing F•D 1 changes the same setting.
• To Move Each Cursor Separately (The default value)
Move the REF (blue) cursor with F•D 1 REF, and move the DELTA (green) cursor with F•D
2 DELTA. You can move both cursors simultaneously by pressing F•D 1 to set it to TRACK.
You can switch the positions of the REF and DELTA cursors by pressing F•D 2.
Procedure
WFM
→
F•5 CURSOR
→
F•3 FD VAR TRACK OFF
→
F•D 1 REF
→
F•D 2 DELTA
• To Move Both Cursors Simultaneously
Move both cursors simultaneously with F•D 1 TRACK. You can move both cursors
separately by pressing F•D 1 to set it to REF. Move the DELTA (green) cursor with F•D 2
DELTA. You can switch the positions of the REF and DELTA cursors by pressing F•D 2.
When F•3 FD VAR TRACK is set to ON, marks appear at both ends of the cursors.
Procedure
WFM
→
F•5 CURSOR
→
F•3 FD VAR TRACK ON
→
F•D 1 TRACK
→
F•D 2 DELTA
