12
5.3
Control
To remotely control the LV 7390 from this instrument, follow the procedure below.
1. Turn on this instrument and the LV 7390
.
This instrument does not have a power switch. Simply connect the power cord. When
this instrument turns on, the POWER LED will light.
2. Connect this instrument’s Ethernet port to the LV 7390 Ethernet port using an Ethernet
cable.
The Ethernet cable is not included. You will need to provide it yourself. You can use a
straight cable or a crossover cable.
When the connection between this instrument and the LV 7390 is established, the
ETHERNET LED lights. If it doesn’t, check section 5.1, “Configuring the LV 7390” and
5.2, “Configuring the LV 7290” again.
Note that the ETHERNET LED remains lit for a while even after the Ethernet cable is
removed.
●
Control
When the ETHERNET LED is lit, the LV 7390 selected with the unit key can be remotely
controlled from this instrument.
You can also control the LV 7390 directly. If you do, the key operation performed on the
LV 7390 selected with the unit key is reflected to this instrument.
● Notes
•
Multiple LV 7390s cannot be controlled simultaneously from this instrument.
(It is possible to connect several of this instrument to an LV 7390 and control it
simultaneously.)
•
USB memory devices and headphones cannot be connected to this instrument.
•
The LV 7390 cannot be turned on and off from this instrument.
