Leader LV 5770SER42, Инструкция по эксплуатации

Страница: 25 / 67

5. SURROUND DISPLAY
22
5. SURROUND DISPLAY
To configure surround display settings, press F•4 SURROUND SETUP on the audio menu.
You can configure surround waveform and scale settings.
This setting is available when F•2 DISPLAY MODE is set to SURROUND.
AUDIO → F•2 DISPLAY MODE to select SURROUND → F•4 SURROUND SETUP →
Figure 5-1 SURROUND SETUP menu
5.1 Adjusting the Surround Waveform Intensity
To adjust the surround waveform intensity, follow the procedure below.
Press the function dial (F•D) to return the setting to its default value (4).
Procedure
AUDIO → F•4 SURROUND SETUP → F•1 SURROUND INTEN: -8 to 4 to 7
5.2 Adjusting the Scale Intensity
To adjust the intensity of the surround and meter scales, follow the procedure below.
Press the function dial (F•D) to return the setting to its default value (4).
Procedure
AUDIO → F•4 SURROUND SETUP → F•2 SCALE INTEN: -8 to 4 to 7
5.3 Selecting the Surround Display Format
To select the surround display format, follow the procedure below.
If adjacent channels (including Lch and Rch for PHANTOM) are of opposite phases, the scale
between the channels is displayed in red.
Procedure
AUDIO → F•4 SURROUND SETUP → F•3 SURROUND 5.1: NORMAL / PHANTOM
Settings
NORMAL:
A waveform that combines Lch, Rch, Lsch, Rsch, and Cch (hard center) is
displayed.
PHANTOM: A waveform that combines Lch, Rch, Lsch, Rsch, and phantom center and a
Cch (hard center) waveform are displayed separately.