Leader LV 5770SER42, Инструкция по эксплуатации

Страница: 16 / 67

3. METER DISPLAY
13
3. METER DISPLAY
To configure meter display settings, press F•3 METER SETUP on the audio menu.
You can set the meter's scale, the response model, and the reference level.
AUDIO → F•3 METER SETUP →
Figure 3-1 METER SETUP menu
3.1 Selecting the Scale
To select the meter's scale, follow the procedure below.
When MAG on the LOUDNESS SETUP menu is set to ON, the scale of the loudness chart is
set to -18 to 9 (LK/LU) in reference to the target level, regardless of the setting specified here.
Procedure
AUDIO → F•3 METER SETUP → F•1 DYNAMIC RANGE: -60dBFS / -90dBFS / MAG
Settings
-60dBFS:
The scale of the meter, loudness chart, and loudness meter is set to -60 to 0
(dBFS/LKFS/LUFS).
-90dBFS: The scale of the meter, loudness chart, and loudness meter is set to -90 to 0
(dBFS/LKFS/LUFS).
MAG: The scale of the meter is set to the level specified by F•3 REF dBFS ± 3 dB.
The scale of the loudness chart and loudness meter is set to -60 to 0
(LKFS/LUFS).
3.2 Setting the Response Model
To select the meter's response model, follow the procedure below. The selected response
model is indicated in the lower right of the display.
Procedure
AUDIO → F•3 METER SETUP
→ F•2 RESPONSE: TRUEPEAK / PPM / VU
→ F•3 PPM MODE: PPM(I) / PPM(II) (when RESPONSE is set to PPM)
→ F•3 PEAK METER: TRUE / PPM(I) / PPM(II) (when RESPONSE is set to VU)