2. SPECIFICATIONS
16
Remote Control Connector
Function
Used to load preset settings, switch input channels,
transmit the alarm signal, and start, stop, and clear the
loudness measurement.
Control Signal
LV-TTL level (low active)
Input Voltage Range
0 to 5 VDC
Control Connector
15-pin D-sub (female)
Locking screws
Inch screws (No.4-40UNC)
*1 You cannot use TELNET and the LV 7770-01 at the same time.
2.3.10
Screen Capture
Function
Captures the display
Display
Displays only the captured image or overlays the
captured image over the input signal
Media
Internal memory (RAM) and USB memory
You can only record one screen capture to the internal
memory.
Data Output
Screen captures can be saved as bitmap files to USB
memory, or they can be saved in a file format that the LV
7770 can load.
Data Input
Data saved to USB memory can be loaded and
displayed on the LV 7770.
2.3.11
Frame Capture (LV 5770SER08 and LV 5770SER09A)
Function
Captures frame data
Display
Displays the captured frame data or superimposes the
captured frame data over the input signal
Media
Internal memory (RAM) and USB memory
You can only record one frame of data to the internal
memory
Data Output
Frame captures can be saved to USB memory as .dpx
files, .tif files, or in a file format that the instrument can
load
Data Input
Data saved to USB memory can be loaded and
displayed on the instrument (*1)
Capture Timing
Manual and automatic (error capture)
Error Capturing
Automatically captures frame data when an error occurs
*1 An input signal in the same format as the frame data is required.
