Leader LV 5480 Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 246

Leader LV 5480 Скачать руководство пользователя страница 137

8. STATUS DISPLAY

129

8. STATUS DISPLAY

To display the status, press STATUS.

If on the SDI IN tab in the system settings, SDI System is set to 4K NMI or NMI, pressing
STATUS displays the IP (NMI) status.

Reference Section 8.10, “IP(NMI) Status Screen Explanation (SER08)”

To return to the normal status display from IP (NMI) status, press F•1 STATUS. To return to the
IP (NMI) status again, press F•2 SDI ANALYSIS and then F•3 NMI INFO.

Figure 8-1 Status display

8.1

Status Screen Explanation

●

SIGNAL

If the LV 5490SER01 or LV 5490SER02 is receiving an SDI signal, “DETECT” is displayed.
Otherwise, “NO SIGNAL” is displayed.
If “NO SIGNAL” is displayed, the following items are not displayed.

●

FORMAT/SUB IMAGE FORMAT

The input signal format is indicated here. It is normally displayed in light blue, but if the
input is not appropriate, it turns red.

●

Freq

The sampling frequency deviation is displayed.
Normally, this is displayed in light blue. If Frequency Error on the ERROR SETUP1 tab is
set to ON, the color changes to red when ±10 ppm is exceeded.
The display range is “<-100 ppm, -100 to +100 ppm, >+100 ppm,” and the accuracy is ±2
ppm.

Reference

ERROR SETUP1 tab → section

8.2.1, “Error Setup 1”

«
...
135
136
137
138
139
...
»

Содержание LV 5480























































































































































































































































Отзывы:

Нет отзывов