Leader LT4610-SER01, Инструкция по эксплуатации

Страница: 59 / 272

7. BASIC OPERATION
38
7.3 Alarm Indications
If an alarm occurs, the ALARM indicator on the front panel blinks in red.
If an attention state occurs, the ALARM indicator on the front panel blinks in orange.
(If an alarm and attention state occur simultaneously, the alarm takes precedence, and the
indicator blinks in red.)
You can check the alarm details with ALARM SYSTEM or ALARM SIGNAL(SER01) on the
STATUS menu. See section 8.3, “Alarm Indications.”
［ＡＬＡＲＭ ＳＹＳＴＥＭ］
ＦＡＮ ［ＡＬＡＲＭ ＳＩＧＮＡＬ］
ＧＰＳ
You can check the attention details with ATTENTION GPS SAT(SER01) or ATTENTION(SER01)
on the STATUS menu. See section 8.4, “Attention Display (SER01).”
［ＡＴＴＥＮＴＩＯＮ ＧＰＳ ＳＡＴ］
ＳＡＴ－ＮＵＭ ２，ＣＮ １５ｄＢ ［ＡＴＴＥＮＴＩＯＮ］
ＬＥＡＰ－ＳＥＣＯＮＤ
7.4 Connecting a USB Memory Device
To write and read various types of data, you can use a USB memory device.
You can connect and disconnect a USB memory device with the power turned on.
When you connect a USB memory device, the following message appears.
Do not turn the power off or remove the USB memory device while it is being accessed.
＊ＵＳＢ ＳＴＯＲＡＧＥ ＤＥＶＩＣＥ＊
＊ ＩＮＳＥＲＴ ＊
When you remove the USB memory device, the following message appears.
＊ＵＳＢ ＳＴＯＲＡＧＥ ＤＥＶＩＣＥ＊
＊ ＥＪＥＣＴ ＊