Leader LT4610-SER01, Инструкция по эксплуатации

Страница: 155 / 272

17. 12G OPTION MENU (SER02)
134
17.3.7 Copying a User Pattern to a USB Memory Device
To copy user pattern data from the LT 4611’s storage memory to a USB memory device,
follow the procedure below.
In this example, the user pattern file name is “LEADER.bmp,” and the format is 4K.
The following menu appears when a USB memory device with the following folder structure
is connected.
USB memory device
└ LT4611_USER
└ USER_PATTERN
└ 4K
└ HD
└ SD
Procedure
12G OPTION → SDI 1 → PATTERN 1 → COPY INT→USB
To copy a user pattern, follow the procedure below.
1. Select the format.
Select SD, HD (2K), or 4K.
３．ＣＯＰＹ ＩＮＴ→ＵＳＢ

４Ｋ
↵
2. Select the copy source in the LT 4611’s storage memory from 001 to 025.
４．ＣＯＰＹ ＩＮＴ→ＵＳＢ

００１ ＬＥＡＤＥＲ．ｂｍｐ
3. Select the OK.
５．ＣＯＰＹ ＩＮＴ→ＵＳＢ
■ＯＫ □ＣＡＮＣＥＬ
4. Copying begins.
In the case of a 4K user pattern, copying takes about 7 minutes. Do not turn the power
off or remove the USB memory device while copying.
ＣＯＰＹ ＵＳＥＲ ＰＡＴＴＥＲＮ
■■□□□□□□□□ ２５％