Electrical supply system
for verhicles
MelfBox
Quick start guide
V 2
General Safety
This guide supports safe handling of the product. Use the product
only in accordance with its intended use:
The MelfBox is a vehicle electrical supply system. Assembly and in-
stallation should only be carried out by qualified electricians. Any
modifications to the product or its components are prohibited and
do not conform to its intended use. Only use original LEAB or
LEAB-approved accessories.
Observe the safety instructions:
DANGER!
Danger from short circuits: Before operating, make
sure there are no open or damaged cables.
DANGER!
Replace
defective parts or damaged cables immediately.
NOTE!
Reverse polarity can damage the unit: Before operating,
make sure that all cables are connected correctly.
NOTE!
Equipment damage and danger of cable fire: Only use the
device within the specified voltage limits.
Package Contents
No.
Item
1x
Cover
1x
Housing
1x
Housing seal
1x
Body seal
3x
Screw 3.5 x 14
1x
Cap
Accessories
Part number
Description
1105001001
Connection cable 2.5 m
1105001002
Connection cable 5 m
1105001003
Connection cable 10 m
Technical Specifications
Part no. 1105002002
Modell
MelfBox
Nominal voltage (AC)
230 V (+/- 10%)
Current, max. (AC)
16 A
Frequency
50 Hz
International Protection
(IP class)
IP55
Protection class
I
Operating display
LED
Switch contact
1 A
Material
Polyamide, glass fibre reinforced (PA6
GF30)
Cable cross-section
2.5 mm²
Contacts
L1/N/PE
Installation depth
56 mm
Installation diameter
55 mm
Weight
0.12 kg
Dimensions (L x W x H) 62 mm x 67 mm x 67 mm
Creating a Body Cutout
Fig. 1:
MelfBox dimensions
To create the body cutout, proceed as follows:
ü
Choose a vertical surface.
ü
Choose an assembly site with minimum dust and which is pro-
tected from water.
ü
Make sure that there is sufficient space at the assembly site.
1. Saw a hole (Ø 55 mm) in the vehicle body.
2. To prevent corrosion, seal the cut surfaces.
ð
The body cutout is now created.
LEAB Automotive GmbH
Thorshammer 6
DE-24866 Busdorf
Tel: +49 (0) 4621 9 78 60-0
Fax: +49 (0) 4621 9 78 60-260
[email protected]
It is prohibited to copy, duplicate, translate or otherwise
pass on the content of this guide to third parties without the
express written permission of LEAB.
We make energy mobile.
