Electrical supply system for
verhicles
MelfBox
Quick start guide
V 3
General Safety
This guide supports safe handling of the product. Use the product only in
accordance with its intended use:
The MelfBox is a vehicle electrical supply system. Assembly and installa-
tion should only be carried out by qualified electricians. Any modifica-
tions to the product or its components are prohibited and do not con-
form to its intended use. Only use original LEAB or LEAB-approved ac-
cessories.
Observe the safety instructions:
DANGER!
Danger from short circuits: Before operating, make sure
there are no open or damaged cables.
DANGER!
Replace defective
parts or damaged cables immediately.
NOTE!
Reverse polarity can damage the unit: Before operating, make
sure that all cables are connected correctly.
NOTE!
Equipment damage and danger of cable fire: Only use the device
within the specified voltage limits.
Package Contents
No.
Item
1x
Cover
1x
Housing
1x
Housing seal
1x
Body seal
3x
Screw 3.5 x 14
1x
Cap
Accessories
Part number
Description
1105001001
Connection cable 2.5 m
1105001002
Connection cable 5 m
1105001003
Connection cable 10 m
Technical Specifications
Part no. 1105002001
Modell
MelfBox
Nominal voltage (AC)
230 V (+/- 10%)
Current, max. (AC)
16 A
Frequency
50 Hz
International Protection (IP class) IP55
Protection class
I
Operating display
LED
Switch contact
1 A
Material
Polyamide, glass fibre reinforced (PA6
GF30)
Cable cross-section
2.5 mm²
Contacts
L1/N/PE
Installation depth
56 mm
Installation diameter
55 mm
Weight
0.12 kg
Dimensions (L x W x H)
62 mm x 67 mm x 67 mm
Creating a Body Cutout
Fig. 1: MelfBox dimensions
To create the body cutout, proceed as follows:
ü
Choose a vertical surface.
ü
Choose an assembly site with minimum dust and which is protected
from water.
ü
Make sure that there is sufficient space at the assembly site.
1. Saw a hole (Ø 55 mm) in the vehicle body.
2. To prevent corrosion, seal the cut surfaces.
ð
The body cutout is now created.
LEAB Automotive GmbH
Thorshammer 6
DE-24866 Busdorf
Tel: +49 (0) 4621 9 78 60-0
Fax: +49 (0) 4621 9 78 60-260
It is prohibited to copy, duplicate, translate or otherwise pass on
the content of this guide to third parties without the express writ-
ten permission of LEAB.
We make energy mobile.
