Le Maitre Ltd.
Salamander Quad Pro User Manual
14
6.2.3.
Tilt Switch
Tilt Switch setting is indicated by the
tEC
and FLAME LEDs.
The Salamander Quad Pro contains a safety tilt switch that will disable the unit if it is tipped beyond
40 degrees from vertical. This will prevent the unit from operating should it be knocked over. It is
possible to disable this tilt-switch if desired.
Warning:
The Salamander Quad Pro is only designed to be used in a vertical position. If the
unit is to be used in any other position, it is the sole responsibility of the user to ensure
safe operation.
The Tilt Lock has two settings: Tilt Lock ON (
t-1
) and Tilt Lock OFF (
t-0
)
Press UP to turn the Tilt Lock ON, and DOWN to turn the Tilt Lock OFF. This setting it stored
automatically.
6.2.4.
‘Staggered delay’
Staggered Delay setting is indicated by all LEDs being off.
Reliable ignition requires a proper air to fuel mixture at the Hot Surface Ignitor (HSI). Multi-canister
bursts release a sub-optimally large amount of fuel. A short single-canister burst preceding the main
blast ensures proper ignition when an order to fire from multiple cans is received. The length of the
‘staggered delay’ after which the remaining cans join in can be adjusted in ‘tEC’ options:
‘F-0’ 0ms (feature disabled)
‘F-1’ 44ms (default)
‘F-2’ 68ms
‘F-3’ 90ms
‘F-4’ 112ms
Warning:
Ignition is not guaranteed for multi-canister bursts with staggered delay
disabled. If the feature is disabled the manufacturer will not be held responsible for
any unexpected behaviour with multi-canister firing.
6.2.5.
Firmware version information
HSI Delay setting is indicated by the single
tEC
LED.
Firmware version is viewable at the end of tEC menu – ‘rEL’ followed by ‘X-X’ indicating the release
number.
