Jumpstart,
or
“Real hams don’t read manuals!”
Ok, but at least read this one section before you transmit:
1. Plug the RCA-14 into your transceiver’s accessory jack using the included cable. Select
the cable appropriate to your transceiver: DIN-13, DIN-8 or DIN 6. You can use the
DIN-8 and DIN-6 together, but you must use the DIN-13 alone.
2. Connect accessories to the RCA jacks according to the pinout on Page 8 of this manual.
3. Operate your station normally.
Specifications
Transceiver interfaces: DIN-13, DIN-8, DIN-7, Mini-DIN-8, Mini-DIN-6 (cables provided)
Accessory interfaces: RCA jacks
Power requirement: none
3
