LDA MPS-8Z, Руководство по поддержке

Страница: 5 / 5

MPS-8Z connection to an audio system with ZES-22
The ACSI bus does not provide remote power to the microphones if the adapter does
not have it, so each MPS-8Z microphone must have its own local source.
For the different functionalities and microphone configurations, please refer to the user
manual available on the LDA Support Website .
2 REQUIREMENTS
For the correct operation of the system, the following requirements must be met:
•
ZES-22 with firmware version 1.0.5 or higher
•
To allow audio input to channel 3 of the ZES-22 matrix, it must be configured as 3
inputs and one output (3x1) or four inputs (4x0). This configuration can be set using
the ZES-22 Setup software.
•
ZES-22 Setup with version 4.1 or higher.
For mor information, kindly visit our Support Website: https://support.lda-audiotech.com/
Picture 5: Detail of MPS-8Z microphone connections